Are you tired of the reduced functioning of your HVAC system? Do you want to get insights into whether your system is constantly failing in giving the best results? Numerous problems can come in the way of your HVAC system’s efficiency. The most common issues come in thermostats and sensors. To know more about these problems and their best solutions, you can refer to M3 Mechanical as the best HVAC company in Colorado Springs to provide the best maintenance services.
Common Problems and Their Solutions by HVAC Company in Colorado Springs
Are you always concerned about the small things disturbing the performance of your HVAC system? Our HVAC Company in Colorado Springs is always there for you to guide you in this regard. From your thermostat to your sensor, we work on fixing everything using the best methodologies. Mostly, the temperature of the thermostat of your system gets very high or very low, which is a big reason for the poor working of your HVAC system. Keep reading this section to know about what other problems you can face and how to get rid of those problems.
Thermostat Not Reaching the Set Temp
If your thermostat is not reaching the set temperature, there are great chances that one of the following reasons might be the cause behind this.
Dirty sensors:
Temperature sensors are used by thermostats to determine when to turn on the heating and cooling system. The sensors in the thermostat’s casing might clog up with dust, grit, and lint and stop functioning properly. Remove the case, clean the parts with a soft bristle brush, and fix the issue.
Damaged sensors:
If cleaning the sensors doesn’t help, they may be broken, giving you a false reading of the room’s temperature. To resolve this problem, expert assistance is required.
Poor thermostat location:
Is your thermostat placed near a vent, an old window, or a place where it will be heated by the sun? You may need to have a professional adjust your thermostat if it isn’t giving you accurate data.
Can Not Change Thermostat Temperature Setting
After a good research, the Colorado Springs HVAC Company came up with the given most common reasons why you can not change the temperature settings of your thermostat.
Locked unit:
Verify the presence of the child lock. To adjust the temperature, you must first turn it off.
No power:
If the thermostat doesn’t work, the power may be the issue. If not, try the batteries or circuit breaker.
Bad wiring:
The thermostat may not operate with bad wiring. Disassemble and check the wires for rust, corrosion, or separation. If you detect any concerns, contact an HVAC technician.
Heating and Cooling Systems Continuously Running
Constantly running heating and cooling systems are very dangerous for your HVAC system. So go through the given reasons and solutions to get this issue fixed.
Auto fan:
Fix the temperature. “Auto” mode keeps the fan blowing. Change the setting so the fan turns on when the heating or cooling system is on.
Faulty thermostat:
The thermostat might be malfunctioning inside. Get in touch with an expert to assist with troubleshooting and repairs.
Thermostat Blank
A blank thermostat can affect the overall functioning of your HVAC system, so it is important to know about the given common reasons for this problem.
Dead batteries:
If your thermostat is blank, remove the lid and check the batteries. If the display activates now, you’re okay.
Tripped breaker:
A home’s hardwired thermostat may have a tripped circuit breaker. Reset the box if the breaker trips.
Tripped safety switch:
Find the furnace/AC safety switch. Accidentally tripped? If you discover abnormal moisture or heat in the system, call a professional HVAC specialist for an inspection.
The thermostat Not Turning On
Here are a few reasons why your thermostat is not turning on. No matter what the reason is, after good research, we have presented the top causes along with their solutions here.
Incorrect settings:
Check the thermostat first. To heat your home, set the dial to “hot.” Air conditioning requires a chilly thermostat.
Overheated HVAC system:
If the HVAC system goes on briefly, it may be overheating. Open all windows and doors and change the filter to enhance ventilation. To avoid compressor overheating, air conditioners may take up to three minutes to restart.
Broken thermostat:
If you’ve tried the usual suspects and your thermostat still isn’t working, it may be time to get a new one.
Conclusion
Your HVAC system needs proper care and attention. The only possible way to do this is to set a proper maintenance schedule to continuously polish the functioning of your system. Whether it is a problem with your thermostat’s temperature or its control settings, you can get it fixed anytime. M3 Mechanical is one of the leading HVAC companies in Colorado Springs working for the last many years. The amazing quality of their HVAC services is something you can never compromise on. So, if you are encountering any problem in your HVAC system, get in touch with them immediately.